Q-: Are the parts Painted or lacquered ?
A-: No paint or lacquer is used.

Q-: Is it safe to hydrablast gasket and bearing surfaces?
A-: Yes , the process is NONABRASIVE and SAFE on these surfaces.
      NO metal is removed.

Q-: Can I do assembled motors?
A-: No, all parts must be completely disassembled , bearings , seals and
      Gaskets removed. Cases and parts should also be degreased and as clean As possible.

Q-: Does the blasting process remove paint ?
A-: NO, paint removal is up to you. I recommend using a good quality
     NON CAUSTIC paint stripper so as not to do any damage to your Aluminum.